TPS mod
01-30-2005 | 11:34 PM
#1
Guest
Posts: n/a
TPS mod
hey yall, ive been searching around this site a bunch and noticed that alot of people were having decent success with what they call the "tps mod." Now i was wandering if anybody could possibly explain exactly what is done in this mod and if there is a maybe a link or something to show how to do it? thanks!
01-31-2005 | 07:26 AM
#2
Moderator
MotoGP
Joined: Dec 2004
Posts: 2,553
From: South Texas
Re: TPS mod
Welcome,
Yes there's a good link. I followed it when I did mine. Just look in the knowledge base section of the forums. It's the one labeled: throttle position sensor.
The only thing I'd like to add is this: mine was too far out of adjustment for the correction slots to handle. I simply pushed out the metal ringlets for the screw holes. This allowed me to rotate the tps sensor a little bit more to get it back into acceptable range. Also, I used a dremel to slot the "headless" screws and a screwdrive to remove them. I'd also suggest punching the screws with the screwdriver and hammer first to break the locking agent.
Yes there's a good link. I followed it when I did mine. Just look in the knowledge base section of the forums. It's the one labeled: throttle position sensor.
The only thing I'd like to add is this: mine was too far out of adjustment for the correction slots to handle. I simply pushed out the metal ringlets for the screw holes. This allowed me to rotate the tps sensor a little bit more to get it back into acceptable range. Also, I used a dremel to slot the "headless" screws and a screwdrive to remove them. I'd also suggest punching the screws with the screwdriver and hammer first to break the locking agent.
Thread
Thread Starter
Forum
Replies
Last Post
