Need Fairing Measurement from Clutch Reservoir
06-25-2008 | 01:34 PM
#1
Thread Starter
Member
Squid
Joined: Mar 2008
Posts: 36
From: Cumming, GA
Need Fairing Measurement from Clutch Reservoir
Hi guys, can someone please measure the distance from the top of their clutch reservoir to the bottom of the fairing with the factory bars straight, full lock left and full lock right. I need this as soon as someone can help. I have a '02 SuperHawk. They are probably all very similiar, I don't know? Thank you.
06-25-2008 | 02:29 PM
#2
pragmatic anarchist
Superstock
Joined: Mar 2008
Posts: 380
From: Philadelphia, PA
measuring
Sorry took so long...odd request of the day prize goes to.... 2 2/8 inches left, maybe 5/8ths center, maybe 1 1/8th to the windscreen at right lock. I also have a 2002, but my fairing stay is a resurrected tweaked unit. Your measurements may vary.
06-25-2008 | 03:21 PM
#3
Thread Starter
Member
Squid
Joined: Mar 2008
Posts: 36
From: Cumming, GA
Thanks P-Panic. I am trying to center my screen after a crazy on road experiance. You said your screen is resurrected, does that mean that it's kinda sorta correct? I'm trying to get exact measurements if possible.
06-25-2008 | 08:05 PM
#4
pragmatic anarchist
Superstock
Joined: Mar 2008
Posts: 380
From: Philadelphia, PA
my fairing sits quite evenly when measured to points on each side from the cap on the stem nut. might be a bit off on the height, but I bet pretty close. bar switch and m/c assemblies are quite asymmetrical.
Thread
Thread Starter
Forum
Replies
Last Post
Besucher98
Modifications - Performance
5
10-24-2005 04:52 AM
