Technical Discussion Topics related to Technical Issues

adjusting rear brake pedal

Thread Tools
 
Search this Thread
 
Old 08-24-2006 | 04:39 PM
  #1  
EngineNoO9's Avatar
Thread Starter
Senior Member
SuperBike
 
Joined: Nov 2005
Posts: 1,011
EngineNoO9 is an unknown quantity at this point
adjusting rear brake pedal

can I adjust it so it's any lower? I couldn't see any way that I could... And I checked the maintenance manual too already...
Old 08-24-2006 | 05:17 PM
  #2  
marmaladedad's Avatar
Hmm?
SuperBike
 
Joined: Oct 2004
Posts: 2,069
From: San Gabriel Valley
marmaladedad is on a distinguished road
...?

There's not a nut that you adjust near the spring?
Old 08-24-2006 | 06:10 PM
  #3  
EngineNoO9's Avatar
Thread Starter
Senior Member
SuperBike
 
Joined: Nov 2005
Posts: 1,011
EngineNoO9 is an unknown quantity at this point
there is but it didn't really move any... I loosened it and couldn't get the pedal to go down further... You just loosen that and then the bracket should move up against it right? maybe mine is just a little rusted... Ill take some pics if I can't get it to move again
Old 08-24-2006 | 07:31 PM
  #4  
EngineNoO9's Avatar
Thread Starter
Senior Member
SuperBike
 
Joined: Nov 2005
Posts: 1,011
EngineNoO9 is an unknown quantity at this point
I tried again and can't get it to move up or down... here's a pic of from what I can tell is the only thing to move it.


Old 08-24-2006 | 07:50 PM
  #5  
CNI Dawg's Avatar
Senior Member
SuperSport
 
Joined: Sep 2005
Posts: 882
From: Dallas, TX
CNI Dawg is an unknown quantity at this point
That nut is only the lock nut.
Push the rubber boot up to reveal the adjusting nut.
I was never able to get a lot of pedal adjustment out of it....some but not a lot
You will have to readjust your brake light switch for the new pedal position
Old 08-24-2006 | 07:56 PM
  #6  
EngineNoO9's Avatar
Thread Starter
Senior Member
SuperBike
 
Joined: Nov 2005
Posts: 1,011
EngineNoO9 is an unknown quantity at this point
oh... guess I'll have to adjust it in the morning...
Old 08-24-2006 | 08:26 PM
  #7  
EngineNoO9's Avatar
Thread Starter
Senior Member
SuperBike
 
Joined: Nov 2005
Posts: 1,011
EngineNoO9 is an unknown quantity at this point
eh I just did it. what a pain in the *** thing to do. wow... I wouldn't have thought that a thing so simple in theory would be such a pain in the *** to do
Old 08-24-2006 | 09:29 PM
  #8  
marmaladedad's Avatar
Hmm?
SuperBike
 
Joined: Oct 2004
Posts: 2,069
From: San Gabriel Valley
marmaladedad is on a distinguished road
My Gilles rearsets don't have that problem...
Old 08-24-2006 | 09:50 PM
  #9  
EngineNoO9's Avatar
Thread Starter
Senior Member
SuperBike
 
Joined: Nov 2005
Posts: 1,011
EngineNoO9 is an unknown quantity at this point
Originally Posted by marmaladeboy
My Gilles rearsets don't have that problem...
all I hear is "blah blah blah I'm a dirty tramp"


Old 08-24-2006 | 10:59 PM
  #10  
marmaladedad's Avatar
Hmm?
SuperBike
 
Joined: Oct 2004
Posts: 2,069
From: San Gabriel Valley
marmaladedad is on a distinguished road
Originally Posted by EngineNoO9
all I hear is "blah blah blah I'm a dirty tramp"


Funny, I feel the same way when your sister is mouthing off.

Buy my race plastics.
Old 08-25-2006 | 12:45 AM
  #11  
EngineNoO9's Avatar
Thread Starter
Senior Member
SuperBike
 
Joined: Nov 2005
Posts: 1,011
EngineNoO9 is an unknown quantity at this point
I will once I get a job. It's been some rough seas lately.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
superhawkfanboy88
Classifieds
0
08-31-2012 12:38 AM
emile
Classifieds
4
08-20-2011 02:54 PM
residentg
Classifieds
0
05-08-2010 07:29 AM
98SuperHawk
Classifieds
3
06-11-2009 09:00 PM
MXC
Classifieds
1
06-18-2006 06:16 PM




All times are GMT -7. The time now is 05:39 AM.