master cylinder for VTR1000 - which? CBR929 ? or ??
08-04-2005 | 12:02 AM
#1
Thread Starter
Member
Squid
Joined: May 2005
Posts: 45
master cylinder for VTR1000 - which? CBR929 ? or ??
A friend needs a master cylinder for his Superhawk.
I'd give him mine if I could find out which one of the CBR's will work as an upgrade to the VTR1000 .. I think I remember someone using a CBR929 master cylinder with the only rub being that it rubs a little on the fairing if not placed just perfectly.
Or maybe someone's got a stock one sitting around ?
I'd give him mine if I could find out which one of the CBR's will work as an upgrade to the VTR1000 .. I think I remember someone using a CBR929 master cylinder with the only rub being that it rubs a little on the fairing if not placed just perfectly.
Or maybe someone's got a stock one sitting around ?
08-04-2005 | 06:51 AM
#2
Senior Member
Back Marker
Joined: Jun 2005
Posts: 126
From: Paris
Re: master cylinder for VTR1000 - which? CBR929 ? or ??
Seems to work well with the CBR 929 MC :
See it here at "FAQ" section : http://webpages.charter.net/gnemish/index.html
What are the best brake pads/lines combination for the VTR? EBC HH pads combined with Galfer or Goodridge braided SS brake lines and a CBR929RR master cylinder. This combination absolutely ROCKS! The performance is about 90% of those on the RC51, and I don't think I'll ever use all the brake on the RC.
08-04-2005 | 07:47 AM
#3
Senior Member
Back Marker
Joined: Jun 2005
Posts: 126
From: Paris
Re: master cylinder for VTR1000 - which? CBR929 ? or ??
Should take a look at this ;-)
https://www.superhawkforum.com/viewtopic.php?t=8
https://www.superhawkforum.com/viewtopic.php?t=8
Thread
Thread Starter
Forum
Replies
Last Post
