Anybody tried these???
02-28-2008 | 02:06 PM
#1
Thread Starter
Moderatio est Figmentum
Superstock
Joined: Jul 2007
Posts: 427
From: Covington, Georgia
Anybody tried these???
02-28-2008 | 02:46 PM
#2
Senior Member
Back Marker
Joined: Oct 2006
Posts: 246
From: New Britain, CT
I actually just put one of these on. I bought mine from X3 racing on ebay, but it looks to be the same exact thing. They are pretty bright, but the signals flash pretty fast. You'll have to get a resistor to slow them down, but other than that, I like um.
02-28-2008 | 04:04 PM
#5
Senior Member
Back Marker
Back Marker
Joined: Sep 2007
Posts: 103
From: Thousand Oaks, CA
02-28-2008 | 04:33 PM
#6
Administrator
MotoGP
Joined: Apr 2006
Posts: 4,402
From: Kempner, TX
Still I like mine and will keep it. Though I'll be adding a nother set at the widest point of the undertail this week.
02-28-2008 | 05:33 PM
#7
Thread Starter
Moderatio est Figmentum
Superstock
Joined: Jul 2007
Posts: 427
From: Covington, Georgia
The brake light is great, the signals not so good. In most day light sunny conditions, they are all but un seeable. At night they do work and are visable, but so close togeather and centered on the bike.. Never trust them to clearly show your intent to turn.
Still I like mine and will keep it. Though I'll be adding a nother set at the widest point of the undertail this week.
Still I like mine and will keep it. Though I'll be adding a nother set at the widest point of the undertail this week.
02-28-2008 | 07:26 PM
#10
Thread Starter
Moderatio est Figmentum
Superstock
Joined: Jul 2007
Posts: 427
From: Covington, Georgia
Cool. There is another superhawk in Oxford, trying to get to join in on the ride this weekend. Could you imagine four of us on sh's from the same area?
02-28-2008 | 07:52 PM
#11
Senior Member
Superstock
Joined: Sep 2006
Posts: 442
From: Hampton GA
Thats great ! I saw JOEMama from the GSB board may be bringing his SH . We might have a mini SHOG rally , LOL . I also may have my usual riding buddy coming with me on his GSXR1k . So whats that 8 or 9 people now ?
03-14-2008 | 09:05 PM
#15
WERA #44
Superstock
Joined: Jul 2007
Posts: 265
From: About 57 miles south of VIR
I got one, My high pipes kinda eliminated the stock signal location. It flashes turns fast, so I may install the resistors to slow it down. I don't like clear tail lights as a rule, but this one is kinda cool.
03-15-2008 | 08:33 AM
#16
v-twin4tmfw
Back Marker
Joined: Jun 2006
Posts: 173
http://myworld.ebay.com/ebaymotors/motorblvd
For the price I wouldn't buy anything but a real Clear Alternatives light with some kind of warranty. Properly built LEDs should last longer than you'll ever need.
03-16-2008 | 03:21 PM
#17
Junior Member
Squid
Joined: Feb 2008
Posts: 16
From: Eagan, MN
Thanks 996 I bought mine off of ebay but it was an actual shop that lists stuff on ebay all the time and I have bought other stuff from them. When I pull my bike out of storage in a few weeks Im going to see if I can take it apart and fix it myself or just send it back and try an get a new one. Its just goofy there is a total of 6 white leds for the license plate light and only the 3 on the left flash the other 3 stay on steady.
03-16-2008 | 10:32 PM
#18
v-twin4tmfw
Back Marker
Joined: Jun 2006
Posts: 173
Yup I had 3 on the right that flashed. I tried fixing it too with no luck. I'm not sure if it was the circuit board or the leds but each set of three lights on the right and left for the license plate have a different power supply or diode so It must be related to one of those. If I had known the hassle I was getting into I would have just killed the license plate lights and used something else to light it up.
Thread
Thread Starter
Forum
Replies
Last Post
Randman
General Discussion
5
06-03-2007 08:36 PM
