View Poll Results: VTR of the Month May 2012
aja
1
2.04%
t-dogg
12
24.49%
Stixx
4
8.16%
AngryOlaf
4
8.16%
Billzilla15
7
14.29%
ebbhead
1
2.04%
chemomche
13
26.53%
Cagracer
2
4.08%
jte4200
5
10.20%
Voters: 49. You may not vote on this poll
VTR of the Month May 2012
#1
VTR of the Month May 2012
Congratulations to chemomche for winning the May 2012 VTROTM!
A BIG thanks to everybody who participated in January's VTROTM, If you did not win, be sure to get your nomination in again this month for your chance at SHF fame and glory!
A BIG thanks to everybody who participated in January's VTROTM, If you did not win, be sure to get your nomination in again this month for your chance at SHF fame and glory!
Last edited by 8541Hawk; 06-03-2012 at 09:31 PM.
#2
Member ID: aja
Name: Aaron
Year: 1998, vin 302
Color: Silver/gray/purple if you want to be a dick. Underside of tank is red.
Modifications: home made manual ccts, PAIR removal, Staintune low mount exhaust, shaved front turn signals, led integrated mirrors, smoked led integrated tail light.
My daily driver, rain or shine, 20 degrees or 120 degrees.
(before the integrated tail light)
Proof she's no garage queen
Name: Aaron
Year: 1998, vin 302
Color: Silver/gray/purple if you want to be a dick. Underside of tank is red.
Modifications: home made manual ccts, PAIR removal, Staintune low mount exhaust, shaved front turn signals, led integrated mirrors, smoked led integrated tail light.
My daily driver, rain or shine, 20 degrees or 120 degrees.
(before the integrated tail light)
Proof she's no garage queen
Last edited by 8541Hawk; 05-01-2012 at 08:15 PM.
#3
Member ID: t-dogg
Guess I'll give it a try.
1998 Superhawk
cbr1000rr front end
900rr braced swingarm
tapeworks graphics
fox twin clicker shock
two brothers full stainless exhaust with wrapped header
sharkskins lower
steering damper
apex riser clip ons
corbin smuggler seat
mototech undertail
pazzo levers
goodridge stainless lines
gilles rearsets
ape ccts
aluminum snorkles
supersprox rear and vortex front sprockets
a bunch of other little stuff i cant think of...
Attached Thumbnails
Guess I'll give it a try.
1998 Superhawk
cbr1000rr front end
900rr braced swingarm
tapeworks graphics
fox twin clicker shock
two brothers full stainless exhaust with wrapped header
sharkskins lower
steering damper
apex riser clip ons
corbin smuggler seat
mototech undertail
pazzo levers
goodridge stainless lines
gilles rearsets
ape ccts
aluminum snorkles
supersprox rear and vortex front sprockets
a bunch of other little stuff i cant think of...
Attached Thumbnails
Last edited by 8541Hawk; 05-01-2012 at 08:15 PM.
#4
Member ID: Stixx
Here is mine.
2003 30,000 miles
Full shark skins body work
Bright white with blue ghost metalic paint
Tapeworks live flame graphics
manual cct's
Jardine high mounts, fully wrapped headers
Starcom 1 intercom, xm radio and gps using ram mounts
sargent seat
helibar risers and heated grips
Here is mine.
2003 30,000 miles
Full shark skins body work
Bright white with blue ghost metalic paint
Tapeworks live flame graphics
manual cct's
Jardine high mounts, fully wrapped headers
Starcom 1 intercom, xm radio and gps using ram mounts
sargent seat
helibar risers and heated grips
Last edited by 8541Hawk; 05-01-2012 at 08:15 PM.
#5
Member ID: AngryOlaf
AngryOlaf's '00 Superhawk...
Daugherty Motorsports modified F4i shock.
Stock Forks w. Racetech Gold valves (compression) and Sonic Springs
Superbrace
Yoshimura TI Exhaust (slip-on)
Galfer SS Lines (brakes/clutch)
Galfer rear rotor
EBC HH pads
Helibars
Corbin Seat (+optional backrest buried somewhere in the garage)
Puig DB Smoke screen
Dunlops - Q front Q2 rear
APE CCTs
RK Chain
Fiberglass Hugger in matte black
GiPro X Type Gear Indicator
Full rear fender as a courtesy to tailgaters on damp roads
Complete set of original turn signals and reflectors
Yellow for improved performance
Lightly scraped right fairing
Pre-Exhaust Installation:
Post-Exhaust Installation:
Enjoy!
- Mike
AngryOlaf's '00 Superhawk...
Daugherty Motorsports modified F4i shock.
Stock Forks w. Racetech Gold valves (compression) and Sonic Springs
Superbrace
Yoshimura TI Exhaust (slip-on)
Galfer SS Lines (brakes/clutch)
Galfer rear rotor
EBC HH pads
Helibars
Corbin Seat (+optional backrest buried somewhere in the garage)
Puig DB Smoke screen
Dunlops - Q front Q2 rear
APE CCTs
RK Chain
Fiberglass Hugger in matte black
GiPro X Type Gear Indicator
Full rear fender as a courtesy to tailgaters on damp roads
Complete set of original turn signals and reflectors
Yellow for improved performance
Lightly scraped right fairing
Pre-Exhaust Installation:
Post-Exhaust Installation:
Enjoy!
- Mike
Last edited by 8541Hawk; 05-01-2012 at 08:16 PM.
#6
member ID: Billzilla15
m in
see my signature for the majority of the mods
__________________
2002 SUPA-hawk Mototeck Under-tail,Shortened 2 Bros Exhaust, Six Spoker Swap, Six Piston Calipers, Integrated Taillight, Memory Foam Seat, HID Retrofit, Proton Flushmounts, APE CCT's, Bridgestone BT016 and more to come
m in
see my signature for the majority of the mods
__________________
2002 SUPA-hawk Mototeck Under-tail,Shortened 2 Bros Exhaust, Six Spoker Swap, Six Piston Calipers, Integrated Taillight, Memory Foam Seat, HID Retrofit, Proton Flushmounts, APE CCT's, Bridgestone BT016 and more to come
Last edited by 8541Hawk; 05-01-2012 at 08:16 PM.
#7
Member ID ebbhead:
Why not..
name: Jt
year: 1998 vtr 1000
paint: copper and flat black.
mod's:
High mount jar's, steel braided brk lines, K&n airfilter, sharkskins underbody, custom paint, modded undertail w/ led turn signals, blah blah blah.
Attached Thumbnails
Why not..
name: Jt
year: 1998 vtr 1000
paint: copper and flat black.
mod's:
High mount jar's, steel braided brk lines, K&n airfilter, sharkskins underbody, custom paint, modded undertail w/ led turn signals, blah blah blah.
Attached Thumbnails
Last edited by 8541Hawk; 05-01-2012 at 08:16 PM.
#9
Member ID: chemomche
Year: 1998
Color: White/Green/Red/Black SBK Castrol Replica
Modifications
Suzuki GSXR750 1998 USD front end + 320mm rotors + Tokico 6 pot calipers
Nissin Radial Master Cylinder
DHM Foldable Brake/Clutch Levers
Braided brake lines(front&back)
Ferodo SinterGrip HH front brake pads
HRC replica fluid reserviors
Fast Bikes Grips
TPS set to 499 Oms
BMC air filter(kind of)
Stanless steel headers(unknown make)
Hurric Carbon Cans
PAIR removed
Fiberglass Race front fairings
Single spot light + Xenon system
Year: 1998
Color: White/Green/Red/Black SBK Castrol Replica
Modifications
Suzuki GSXR750 1998 USD front end + 320mm rotors + Tokico 6 pot calipers
Nissin Radial Master Cylinder
DHM Foldable Brake/Clutch Levers
Braided brake lines(front&back)
Ferodo SinterGrip HH front brake pads
HRC replica fluid reserviors
Fast Bikes Grips
TPS set to 499 Oms
BMC air filter(kind of)
Stanless steel headers(unknown make)
Hurric Carbon Cans
PAIR removed
Fiberglass Race front fairings
Single spot light + Xenon system
Last edited by chemomche; 05-16-2012 at 09:45 AM.
#11
Ill give this a shot.
Member ID: Cagracer
Year: 1998 #000007
Color: Red (the fastest color)
Mods: Ape ccts, Pazzo shorty levers, stock shorty exhaust, rejetted, recovered stock seat, up 2t in rear, and a few other little things.
Ridden rain or shine and once or twice in light snow.
Member ID: Cagracer
Year: 1998 #000007
Color: Red (the fastest color)
Mods: Ape ccts, Pazzo shorty levers, stock shorty exhaust, rejetted, recovered stock seat, up 2t in rear, and a few other little things.
Ridden rain or shine and once or twice in light snow.
#12
5 more days to get your entries in this month....
and no need for the member ID stuff if you enter your own bike, I just did that because I had to transfer the bikes from feb when life got in the way of running the contest...
and no need for the member ID stuff if you enter your own bike, I just did that because I had to transfer the bikes from feb when life got in the way of running the contest...
#13
98 Mario Nava Hawk
Ok guys,
I am in! Just got it put back together after a few months of work.
Here we go:
Full Mario Nava Bodywork
Powder Coated Subframe, Calipers, Rims, Fuel Cap, and Sprocket Cover
D&D exhaust
R6 RR
Ape CCTs
Ride It Moto Levers
Double Bubble Screen
Scott's Steering Damper
Integrated Tail Light
Proton Turn Signals
Steel Braided Clutch and Brake Lines (Front and Back)
Jet Kit
K&N Air Filter
DID 520 Chain
AFAM 16/41 Sprockets
PAIR Mod.
Projection Components Hangers
Voltage Indicator
Speedo Healer
Brake Modulator
Outer stuff...
I am in! Just got it put back together after a few months of work.
Here we go:
Full Mario Nava Bodywork
Powder Coated Subframe, Calipers, Rims, Fuel Cap, and Sprocket Cover
D&D exhaust
R6 RR
Ape CCTs
Ride It Moto Levers
Double Bubble Screen
Scott's Steering Damper
Integrated Tail Light
Proton Turn Signals
Steel Braided Clutch and Brake Lines (Front and Back)
Jet Kit
K&N Air Filter
DID 520 Chain
AFAM 16/41 Sprockets
PAIR Mod.
Projection Components Hangers
Voltage Indicator
Speedo Healer
Brake Modulator
Outer stuff...
#15
Like the Mario Nava bodywork one but hate the color. Like the color on the silver/purple one too Aja.
There are some RED ones to vote for and even trotting out Angry Olaf's again.
So many choices this month.
There are some RED ones to vote for and even trotting out Angry Olaf's again.
So many choices this month.
Last edited by RWhisen; 05-16-2012 at 08:26 AM.
#16
The color scheme Mario Nava bike is so freaking cool! Looks like old school Wolverine! Gotta upgrade the suspension on that puppy...
I can't not vote for it, though. The colors are just weirding me out...
I can't not vote for it, though. The colors are just weirding me out...
#17
Yeah, I went crazy on the color scheme. I needed it to be visually loud and from the responses I seem to have achieved that goal! Never thought of Wolverine but at least I have somthing else to compare it to besides smurfette...
#22
Since tdoggs bike is now my bike i can say depending on the test ride those forks may be available the swinger is getting powder coated and going on mine which should be ready for julys contest... just sayin...