BeaverRun trackday pics from last Fall
02-02-2005 | 11:24 AM
#3
Thread Starter
Senior Member
Superstock
Joined: Jan 2005
Posts: 347
From: Western NY
Setup wise, I have .90kg racetech springs up front (no gold valves) with 7.5wt oil, Ohlins out back with a 5mm shim. I might also have the forks raised up through the triples a bit, but no more than 8-10mm. Sag I set around 30mm.
I have lots of other track pics, just not sure how many people care to see 'em .
02-02-2005 | 01:20 PM
#5
Moderator
MotoGP
Joined: Dec 2004
Posts: 2,553
From: South Texas
Re: BeaverRun trackday pics from last Fall
02-02-2005 | 04:06 PM
#6
Thread Starter
Senior Member
Superstock
Joined: Jan 2005
Posts: 347
From: Western NY
Re: BeaverRun trackday pics from last Fall
Oh, and the pic with the repli racers behind me.. Those are my two buddies I typically hit trackdays with, the first guy is my age on his R1, the next one is Rodger, just turned 50 and rides the stink out of his 636.. You know I blew that pic up and framed it for each of them, nice in-your-face Christmas gifts!! hhehehe.
02-03-2005 | 02:19 PM
#8
Thread Starter
Senior Member
Superstock
Joined: Jan 2005
Posts: 347
From: Western NY
Re: BeaverRun trackday pics from last Fall
A couple from Mosport (ontarioa, canada) in 2003. Got rid of the carbon TBR's since it was such a pain to repack them every season with all the rivets, etc.
02-03-2005 | 09:58 PM
#9
Thread Starter
Senior Member
Superstock
Joined: Jan 2005
Posts: 347
From: Western NY
Re: BeaverRun trackday pics from last Fall
I'm pretty happy with the microns... much easier to repack than the TBR's, quieter too. I was getting some warnings from one track I attend given some recent db testing they had to start doing. That's when i found the used set of Microns... I don't get any sort of whistling or strange noise out of them... Maybe that's the sound of air inside where PACKING should be, hehe ;-) Micron socks you for repack kits, beware.
02-04-2005 | 04:02 PM
#10
Senior Member
SuperSport
Joined: Dec 2004
Posts: 764
From: Nananimo, B.C.
Re: BeaverRun trackday pics from last Fall
I know, I know lol
Stupid me, I bought the packing which was like $80 cdn plus shipping, take the can apart and WTF! all the packing is there and seemingly in perfect condition, so are the end cap gaskets and rubber seals. I exchanged emails with Micron and they said they'd never heard of their units making a whistling sound.
Oh well, its not like its annoying. Kinda sounds like a supercharger. You mix that with all the strange gearing/whirring sounds that come from out engines and you get a very distinctive noise.
Stupid me, I bought the packing which was like $80 cdn plus shipping, take the can apart and WTF! all the packing is there and seemingly in perfect condition, so are the end cap gaskets and rubber seals. I exchanged emails with Micron and they said they'd never heard of their units making a whistling sound.
Oh well, its not like its annoying. Kinda sounds like a supercharger. You mix that with all the strange gearing/whirring sounds that come from out engines and you get a very distinctive noise.
Thread
Thread Starter
Forum
Replies
Last Post
