Parting Out 1998 Red SH
10-29-2005 | 11:03 PM
#1
Thread Starter
Senior Member
Back Marker
Joined: May 2005
Posts: 120
From: Thousand Oaks, CA.
Parting Out 1998 Red SH
Just purchased a red 1998 (Mucho Thankso to Jason C, see his post "98 SH fs in SoCal - Oct 3). Much of the bike will be available with the exception of a few things. I need a new 2nd gear, so I'll be using the entire engine/carbs/gearbox (Moriwaki here I come!) Once I get the engine rebuilt, then my entire engine will be available. I will also be using the new forks (Racetech here I come), and when those are done then mine will also become available. And I will also be using the front wheel (mine has kink in lip from the last guy who changed tire), and of course when I get the switch done, then my old one will be available. Jason also threw in a few spare parts..... My first priority is to take the whole bike apart so I can get what ever parts people are looking to buy out of the garage and have a bit more room..... I am not sure how long all this will actually take.... I am figuring a few weeks? So, If anyone needs anything, and doesn't have to have it NOW, then maybe we can deal before I try my hand at Ebay....
10-29-2005 | 11:45 PM
#2
Senior Member
Superstock
Joined: Mar 2005
Posts: 295
From: Seattle
I'm interested in your old motor... How many miles are on it and how does it run?
Mine is at 50K + and still runs ok, but I have a sinking feeling about it.
How much are you gonna want for the engine?
I think shipping from Cali. should not be too crazy.
Mine is at 50K + and still runs ok, but I have a sinking feeling about it.
How much are you gonna want for the engine?
I think shipping from Cali. should not be too crazy.
11-02-2005 | 03:28 PM
#3
Senior Member
Superstock
Joined: Apr 2005
Posts: 371
From: No longer in 'The Suck'!!!
Does the rear fender still have the stock signal mounts intact? I don't care if it's been shortened, just whether or not the signal mount locations are still usable. I hacked my fender off even with the tailsection, then later got a set of Beetlebags which use those mounts for a cross bolt. I built a bracket, but it's not 'exactly' right, and the ~2mm I'm low on the left mount hole is causing the bag to rub against the tailsection. If it's viable, I'm definetly interested.
11-04-2005 | 10:43 PM
#7
Thread Starter
Senior Member
Back Marker
Joined: May 2005
Posts: 120
From: Thousand Oaks, CA.
Re: Parting Out 1998 Red SH
The gearshifter linkage is primo...... but I don't have the engine outta the frame yet and it will be a while till I get around to doing the full Moriwaki rebuild and the covers which are both scratched come off....... PM me and we can chat....
11-05-2005 | 09:53 PM
#11
Thread Starter
Senior Member
Back Marker
Joined: May 2005
Posts: 120
From: Thousand Oaks, CA.
Re: Parting Out 1998 Red SH
Are you interested in just the slip-ons or do you want the entire stock headers? The slip-ons are in pretty good shape, and so are the headers.... I can get you some pics in a day or two.... I have no idea what would be a fair price.... How does $50.00 for both slip-ons sound, and perhaps $25.00 for the stock headers? Let me know what you think, and of course the price is flexible, in case you see something on Ebay and wanna deal so you don't have to wait/bid etc.... No prob to ship either, I got both fed ex and ups nearby as well as post office......
11-07-2005 | 01:14 AM
#12
Thread Starter
Senior Member
Back Marker
Joined: May 2005
Posts: 120
From: Thousand Oaks, CA.
Gearshift linkage for Nupenoble
I finally got the linkage off the bike, and as said before, it is in primo condition.... as a matter of fact it got a spare too..... don't know how you wanna talk $ since you can't PM.... let me know it you wanna Email me or if the forum is okay..... I'm flexible on price... You got 1st dibs.... not looking to make a killing, just trying to get a couple of bucks for future rebuild and make space in garage..... Darren
11-14-2005 | 08:05 AM
#18
Junior Member
Squid
Joined: Nov 2005
Posts: 10
From: Billerica, MA
Re: Parting Out 1998 Red SH
I just picked up a crashed SH that will be my winter project. I'm interested in the shift linkage, brake lever, and clutch master cylinder if they're available. (I'm new to the forum and can't PM) Thanks.
-Jay
-Jay
11-14-2005 | 08:58 AM
#19
Thread Starter
Senior Member
Back Marker
Joined: May 2005
Posts: 120
From: Thousand Oaks, CA.
Re: Parting Out 1998 Red SH
Jay, I got the left side peg mount/shift linkage assy, and a complete front brake assy (m/c, lever, lines, etc). Just let me know exactly what you need, and what ever else down the road.... thanks for your interest, Darren.
11-14-2005 | 09:00 AM
#20
Thread Starter
Senior Member
Back Marker
Joined: May 2005
Posts: 120
From: Thousand Oaks, CA.
Re: Parting Out 1998 Red SH
Sorry Jay, forgot to mention that the entire clutch assy is already spoken for by another member, however if it becomes avail later, you got dibs....
11-14-2005 | 06:26 PM
#22
Junior Member
Squid
Joined: Nov 2005
Posts: 10
From: Billerica, MA
Re: Parting Out 1998 Red SH
-Jay
11-17-2005 | 07:18 AM
#23
Senior Member
Back Marker
Joined: Jun 2005
Posts: 165
From: Riverside, Calif ( Sun City)
Im looking for rims... noticed you are taking the front... rear still available? Cush Drive and sprocket mounts not a requirement, but would be a plus...
Im in Riverside ( Sun City)
thanks
Im in Riverside ( Sun City)
thanks
11-18-2005 | 06:07 AM
#25
Senior Member
Back Marker
Joined: Jun 2005
Posts: 165
From: Riverside, Calif ( Sun City)
11-18-2005 | 06:55 AM
#26
Senior Member
MotoGP
Joined: Jan 2005
Posts: 3,844
From: Gainesville FLA.
Re: Parting Out 1998 Red SH
I don't know if the message got sent to you or not so sorry if I'm repeating myself. The color is black slightly faded from being a '98 but not badly the polished part shines nicely and the bike has always been garaged. It is perfectly straight and has never hit a curb or pot hole. The only reason I need to get rid of it is I have 5 spoke rims now, (900rr on back RC51 on front). I would love to keep it as an extra for track days but I already sold the front to slowhawk and could use the money for bills,(of course).
I was thinking $150.00 shipped and I will guarantee it's straight I'll even put a fresh polish on it for you. It will come with the rotor but no cush drive or sproket, unless you want the stock sproket without the drive I have a 520 chain so it does me no good.
I seem to be having a problem with adding an attacnment on the pm you may have already gotten this message twice but oh well.
I was thinking $150.00 shipped and I will guarantee it's straight I'll even put a fresh polish on it for you. It will come with the rotor but no cush drive or sproket, unless you want the stock sproket without the drive I have a 520 chain so it does me no good.
I seem to be having a problem with adding an attacnment on the pm you may have already gotten this message twice but oh well.
11-18-2005 | 07:18 AM
#27
Senior Member
Back Marker
Joined: Jun 2005
Posts: 165
From: Riverside, Calif ( Sun City)
Didnt get the PM at all... so thanks for posting...
Sounds good... let me gather some extra cash... I do want it... but if someone else has the money up front... don't hesitate... just let me know... thanks
Gonna be getting a set chromed so collecting stuff for the 'bling'
Sorry to the thread leader for the hijack....
Sounds good... let me gather some extra cash... I do want it... but if someone else has the money up front... don't hesitate... just let me know... thanks
Gonna be getting a set chromed so collecting stuff for the 'bling'
Sorry to the thread leader for the hijack....
