OMG Becky, look at that Hawk!!

Reply Subscribe

Thread Tools

Search this Thread

02-10-2023 | 08:03 AM

#31

Wolverine

Thread Starter

Moderator

MotoGP

Joined: Jul 2007

Posts: 5,116

From: Gettysburg, Pa

Quote:

Originally Posted by xeris

Yes, issues. Axle diameter, bearing and seal inside and outside diameter and depth, bolt pattern and diameter and offset of brake rotor (I have a chart of those numbers for different bikes, if it would help), spacer lengths and diameters, distance collar (that's the tube inside the wheel between the bearings), probably some others that I'm missing.
You most likely know this, Partzilla has a feature at the bottom of the individual part that shows other models common to that part. Helpful when mixing and matching parts.
Daunting, but I'm sure you will get it sorted.
Post up your progress, interested in the details.

Definitely will post progress. I’m not diving into too many details till I get there. Need new forks mounted and a mock up before even thinking about the wheel details. I do need to decide on a color for fresh powder. Leaning towards letting the lips polished.