WTB, Jardine connector pipe
07-24-2008 | 11:37 PM
#1
Thread Starter
medium fast guy
Back Marker
Joined: May 2008
Posts: 212
From: western MI, rust & pot hole capital of the world
WTB, Jardine connector pipe
I am looking for the chrome left side connector pipe only, for an RT1 high pipe system.
Any leads or info would be appreciated.
Any leads or info would be appreciated.
07-28-2008 | 11:52 PM
#2
Member
Squid
Joined: Sep 2005
Posts: 61
From: New Jersey
you an buy them from jardine direct. the part that is riveted into the cans where the springs attached broke on mine and i got just that piece from jardine.
07-29-2008 | 12:14 AM
#3
Thats Mr Dill hole to you
Superstock
Joined: Aug 2007
Posts: 389
From: Sioux Falls, SD Beeeotch
07-31-2008 | 07:17 AM
#4
Junior Member
Squid
Joined: Jul 2008
Posts: 25
good info!
filter, I must've not spent enuf time on the Jardine site.I never found the info you did.I'm glad they are selling pieces for their exhaust systems, since I need one to make mine right. The previous owner of my bike, dropped it, mashed it, then repaired it to about 75% of original flow area.I , for obvious reasons, want to have it replaced. My KTM "commuter bike" is in the shop , AGAIN , for the same problem, and with fuel costing the way it does, and me commuting in traffic 1 hour+ each way, I'm putting the VTR on the road for it's fuel economy. It's gotta get better than my 4X4 Cummins(17 mpg)!! Thanx for the info!
08-02-2008 | 11:01 PM
#5
Thread Starter
medium fast guy
Back Marker
Joined: May 2008
Posts: 212
From: western MI, rust & pot hole capital of the world
The pipes shown in the pics appear to have a spring joint at one end. Mine may be an older stle, with both ends attaching with clamps. Your thoughts?
08-07-2008 | 08:54 PM
#6
Thread Starter
medium fast guy
Back Marker
Joined: May 2008
Posts: 212
From: western MI, rust & pot hole capital of the world
bump
08-07-2008 | 09:46 PM
#7
Thats Mr Dill hole to you
Superstock
Joined: Aug 2007
Posts: 389
From: Sioux Falls, SD Beeeotch
Are your slip ons carbon fiber? or aluminum ? im guessing carbon since those have a diff mount it appers.
this is the part # for you carbons if thats what you have and i cant find them anywhere on the site but its in there catalog
18-1009-322-02 Says they come with a billet clamp instead of a spring mount .... humm intersesting
this is the part # for you carbons if thats what you have and i cant find them anywhere on the site but its in there catalog
18-1009-322-02 Says they come with a billet clamp instead of a spring mount .... humm intersesting
Last edited by filter69; 08-07-2008 at 09:51 PM. Reason: info add
08-08-2008 | 09:05 AM
#8
Thread Starter
medium fast guy
Back Marker
Joined: May 2008
Posts: 212
From: western MI, rust & pot hole capital of the world
Good info....
They are the semi shiny black aluminum style that utilize clamps at both the header to connector pipe joint, and at the connector pipe to muffler joint.
Thanks again.
They are the semi shiny black aluminum style that utilize clamps at both the header to connector pipe joint, and at the connector pipe to muffler joint.
Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
