SOLD: Parting a '98 and an '03
#1
SOLD: Parting a '98 and an '03
Edit:
Blue bike is sold. Red bike is in parts in my basement. Frame with title is pending sale. Fuel tank and tail plastics sold.
Location is South East Massachusetts.
Admins, apologies if I have not conformed with any rules (I did read them). If I am not in compliance, I will make corrections as needed.
Blue bike is sold. Red bike is in parts in my basement. Frame with title is pending sale. Fuel tank and tail plastics sold.
Location is South East Massachusetts.
Admins, apologies if I have not conformed with any rules (I did read them). If I am not in compliance, I will make corrections as needed.
Last edited by Zedzded; 05-15-2024 at 10:47 AM.
#3
I'm assuming you mean bodywork? I do have the lowers and front fairing in storage. I'll need to dig them out. I'll start to take pictures and list prices of parts. No PM sales. All comments and offers must be here in the thread.
#6
#7
Upper looks to be OEM with a crack and a small scratch. All tabs intact. I’ll post some more detailed and dated pics tomorrow. Lower is sharkskinz
and has a heat damaged area and a scratch from a ramp it looks like. Front fender is also sharkskinz.
pending more photos to comply with forum rules I’ll throw out some numbers
$350 upper including windshield
$200 lower
$50 fender
all prices plus shipping at whatever it costs.
let me know if I’m wildly off-base with those numbers.
Will post dated and named photos tomorrow as I’m about to go on a date with my long-suffering wife.
PayPal goods and services only to protect broth buyer and seller and I will pay the fees.
and has a heat damaged area and a scratch from a ramp it looks like. Front fender is also sharkskinz.
pending more photos to comply with forum rules I’ll throw out some numbers
$350 upper including windshield
$200 lower
$50 fender
all prices plus shipping at whatever it costs.
let me know if I’m wildly off-base with those numbers.
Will post dated and named photos tomorrow as I’m about to go on a date with my long-suffering wife.
PayPal goods and services only to protect broth buyer and seller and I will pay the fees.
#11
I checked and I only have one mirror. Sorry. I do have 2 sets of bar ends and they are in average shape. No deep scratches or anything I'll send you the two best ones if you for shipping plus $10 if you like.
#12
Sounds good. I'm out of touch with values for this bike but does $350 plus shipping sound reasonable for all of those? I also want to be sure you know the upper has a crack on the arm close to where the mirror attaches. See pictures above.
#13
Yeah, I can do that. May need a couple other things as well. Had a 25 mph lowside on sand and pea gravel. Still in assessment phase. Saw the crack on the upper. LMK what the total is with shipping when you get to that point
Last edited by buckeyehawk; 10-13-2023 at 02:08 PM. Reason: additional info
#14
Sorry about the low side. Happens to the best of us. I’ll start tearing her down for the subframe this evening. I can start shipping stuff next week as it won’t all safely go in one box. Let me know what else you might need and we can work it out as we go. Thanks.
#17
Shipping would be to 97124, Hillsboro Oregon. I can do paypal for payment.
Last edited by ZKarma; 10-16-2023 at 11:29 AM.
#20
Happy Holidays;
Are you still selling parts off these bikes Zed?
Looking for the Front Cowl Stay; if it is not damaged or bent and has all the internals(weights, rubbers).
Give me a price for just the part. Shipping can be worked out easily enough.
Thanks
Are you still selling parts off these bikes Zed?
Looking for the Front Cowl Stay; if it is not damaged or bent and has all the internals(weights, rubbers).
Give me a price for just the part. Shipping can be worked out easily enough.
Thanks
#25
#26
Update on what's available. The 03 is still the same as in the pics above. I'd like to sell it as is and I'll take $1000. Come and get it in Massachusetts. There's plenty to be made there even if you were to part it out. I just don't have the time or space to part it, although I will if nobody want's the whole bike. The red bike I have stripped down to frame, engine, forks and swingarm and i have been parting out stuff bit by bit. I still have the seat and seat cowl from the red bike (surprised they have not sold) and the front fairing, belly pan and tail fairing which are all around 8-9/10.
#29
Whats the story about the front stay that I asked about?
Edit;
Maybe you don't understand exactly what I'm asking about;
The front stay is the odd shaped piece that is held onto the headstock or steering stem housing on the frame with 2 bolts on tabs/bosses. Its the part that the gauge cluster and cowl attaches to at the point of the side mirrors. It's steel.
Edit;
Maybe you don't understand exactly what I'm asking about;
The front stay is the odd shaped piece that is held onto the headstock or steering stem housing on the frame with 2 bolts on tabs/bosses. Its the part that the gauge cluster and cowl attaches to at the point of the side mirrors. It's steel.
Last edited by GreyWater; 03-10-2024 at 10:14 AM. Reason: Clarity
#30
Whats the story about the front stay that I asked about?
Edit;
Maybe you don't understand exactly what I'm asking about;
The front stay is the odd shaped piece that is held onto the headstock or steering stem housing on the frame with 2 bolts on tabs/bosses. Its the part that the gauge cluster and cowl attaches to at the point of the side mirrors. It's steel.
Edit;
Maybe you don't understand exactly what I'm asking about;
The front stay is the odd shaped piece that is held onto the headstock or steering stem housing on the frame with 2 bolts on tabs/bosses. Its the part that the gauge cluster and cowl attaches to at the point of the side mirrors. It's steel.