FOR SALE: Moriwaki Exhaust, Pistons, Cams
11-04-2012 | 04:02 PM
#1
Thread Starter
Senior Member
SuperSport
Joined: Jun 2010
Posts: 636
From: Baltimore, Maryland
FOR SALE: Moriwaki Exhaust, Pistons, Cams
NEW LOWER PRICES
I've decided rather than rebuild my motor again I'll be parting out my Superhawk. I'm talking with a friend about starting a shop so I'm clearing out what I can to gather some funds in the least amount of time. Moriwaki Pistons/Cams/Exhaust, CBR1000rr Forks, Penske Shock, stick coils, ect
I STILL HAVE THE MORIWAKI PISTONS for *$300* shipped, CBR1000 Front End with risers for $900 shipped
Penske shock - SOLD
MORIWAKI EXHAUST - SOLD
MORIWAKI CAMS - SOLD
Here is a link to my photobucket album with all the other pictures.
I've decided rather than rebuild my motor again I'll be parting out my Superhawk. I'm talking with a friend about starting a shop so I'm clearing out what I can to gather some funds in the least amount of time. Moriwaki Pistons/Cams/Exhaust, CBR1000rr Forks, Penske Shock, stick coils, ect
I STILL HAVE THE MORIWAKI PISTONS for *$300* shipped, CBR1000 Front End with risers for $900 shipped
Penske shock - SOLD
MORIWAKI EXHAUST - SOLD
MORIWAKI CAMS - SOLD
Here is a link to my photobucket album with all the other pictures.
Last edited by 98VTRrider; 10-07-2013 at 06:37 AM. Reason: lower prices
11-04-2012 | 04:11 PM
#2
Thread Starter
Senior Member
SuperSport
Joined: Jun 2010
Posts: 636
From: Baltimore, Maryland
11:2 Pistons
These are Moriwaki High Compression 11:2 forged pistons. Installed with a few thousand miles and ran up until 26k, so they have a little over 20k miles on them. Includes the wristpins and clips. Some carbon buildup on the rear piston needs cleaned off, the front is clean from having the head replaced recently. They are in good shape and don't have any wear marks or anything. These were involved in a CCT failure which resulted in bent valves, but the piston has no visible damage or impact, and ran again for a while when I replaced the head until the cam chain broke...as far as I can tell the pistons/valves didn't touch the second time...
Part No: ME98
$300 shipped
I will ship these in the original Moriwaki packaging that I received with the bike.
Part No: ME98
$300 shipped
I will ship these in the original Moriwaki packaging that I received with the bike.
Last edited by 98VTRrider; 10-07-2013 at 06:38 AM.
11-04-2012 | 07:52 PM
#13
Senior Member
SuperBike
Joined: Feb 2007
Posts: 1,252
From: boston
Oh I remember... I'm reminded every time I check my bank account when I find a sweet deal on something I "need"
Until I getcback on my feet with my work situation and I'm no longer drowning all I can do is work on what I have which isn't a problem because I still have the rest of the bottom end of the engine to dismantle, parts to clean and parts to sand and prep for paint...
Until I getcback on my feet with my work situation and I'm no longer drowning all I can do is work on what I have which isn't a problem because I still have the rest of the bottom end of the engine to dismantle, parts to clean and parts to sand and prep for paint...
11-05-2012 | 07:24 AM
#17
Thread Starter
Senior Member
SuperSport
Joined: Jun 2010
Posts: 636
From: Baltimore, Maryland
Pickup is fine, I'll take off whatever shipping would be, so I guess $950 for the pistons/cams picked up.
11-05-2012 | 08:38 AM
#18
Senior Member
Superstock
Joined: Oct 2009
Posts: 325
From: MN
what are you asking for the fork setup and the penske?
I have no problems quoting international shipping, but I'd rather not wait a month for it. If things are still here when you have funds we can work it out then.
Yea, I wasn't sure what these parts are worth. I know they're no longer being made so they are rare, but being used I wasn't sure how to value them. I put prices I figured would encourage a quick sale. I though about ebay, but I wanted to give forum members a chance at them first.
Pickup is fine, I'll take off whatever shipping would be, so I guess $950 for the pistons/cams picked up.
Yea, I wasn't sure what these parts are worth. I know they're no longer being made so they are rare, but being used I wasn't sure how to value them. I put prices I figured would encourage a quick sale. I though about ebay, but I wanted to give forum members a chance at them first.
Pickup is fine, I'll take off whatever shipping would be, so I guess $950 for the pistons/cams picked up.
11-05-2012 | 10:16 AM
#20
Member
Squid
Squid
Joined: Dec 2010
Posts: 47
From: surrey /england
EXHAUST
The MORIWAKI stage 1 exhaust system is quite an early version .
You can tell as it has the facility to plug in a lambda sensor on the headers , you can see it on the right hand side , where its all spliced together .
Although they have seen better days , its still a crackin system and
they sound real nice !!!
If i didnt already have 3 MORIWAKI systems
i would have them off you .
YETI..
You can tell as it has the facility to plug in a lambda sensor on the headers , you can see it on the right hand side , where its all spliced together .
Although they have seen better days , its still a crackin system and
they sound real nice !!!
If i didnt already have 3 MORIWAKI systems
i would have them off you .YETI..
11-05-2012 | 11:03 AM
#21
ukbiker.me
Back Marker
Joined: Jan 2009
Posts: 116
From: Manchester UK
Been on the look out for Cam's for the best part of 4 years or more
Thanks
Seb.
11-05-2012 | 01:07 PM
#22
Thread Starter
Senior Member
SuperSport
Joined: Jun 2010
Posts: 636
From: Baltimore, Maryland
The forks are listed in another For Sale thread, $1000 shipped for the forks $500 shipped for the Penske
$75 shipped for the stick coils ready to plug and play, I have pictures posted of mine in a stick coil thread I recently saw was posted in.
Yea the guy installed all these parts the first year he owned it in 1998 I believe. I just noticed the sensor bung for the first time when I took it off. They really do sound amazing, loud and mellow at the same time
The MORIWAKI stage 1 exhaust system is quite an early version .
You can tell as it has the facility to plug in a lambda sensor on the headers , you can see it on the right hand side , where its all spliced together .
Although they have seen better days , its still a crackin system and
they sound real nice !!!
If i didnt already have 3 MORIWAKI systems i would have them off you .
YETI..
You can tell as it has the facility to plug in a lambda sensor on the headers , you can see it on the right hand side , where its all spliced together .
Although they have seen better days , its still a crackin system and
they sound real nice !!!
If i didnt already have 3 MORIWAKI systems
i would have them off you .YETI..
