Hey group, first thanks for all the post. I am using them to take on my leaky carb project. It pours gas through the carb air vent so I'm assuming the float is stuck. My first carb rebuild..yey

So while I have this thing apart, my tired scrap bike could use some parts if anyone has any. Here is what I am looking for:

Choke cable & choke fittings (looks like someone may make the fittings as well?)
Carburetor intake boot (mine was super hard with no wiggle room, assuming thats not normal)
carb jet kit - (for funzies? I have stock jet sizes so far)
Performance air filter (doubtful to find a good used one)
all fairings (dont need, but my wife would love it not to be held together by zipties. To me they're estetic)
Handle levers (mine are broke down to the ultra short 2 fingers)
any other cheap performance mods or anything else I should look at while its apart? I am going to do the tps mod amd maybe change the plugs. Bike is pretty much stock with what I think is a gutted muffler.

I really just need the choke kit as I broke every part if mine in a rage after the fitting fell apart, but I figured it wouldnt hurt to put out feelers on the others. If nothing else I could try to plug the carb and just run the front cylinder on choke. Its just for warmup anyways right?

Thanks yall!
-Shipping to the south obvously

 

I'm sure I have enough to make a jet kit too, if you like I can put together a kit that will get you pointed right.

2 adjustable needles DJ
2 mains probably 180/185
2 pilots I think I have 48s or 45

AV

 

Here you go. Unfortunately the choke cables need new threaded ends so I can't sell you those. I do have jets though. Missing one circlip which I bet you can find pretty easy. Let me know if you want them. I also have a pair of dyno jet slide springs if you want those.

AV