Looking in to making rear sets for superhawks if there's a market for it
03-25-2013, 05:21 PM
#1
Member
Squid
Thread Starter
Join Date: Feb 2011
Posts: 56
Looking in to making rear sets for superhawks if there's a market for it
Hey everyone it's been a long time since I have been on here and I have been playing around with idea of making rear sets I'm a machinist and have started making bar ends and frame sliders and I am also looking in to axle sliders this mite be posted in the right place but if anyone is interested in any of the above parts or has a suggestion for a part that is hard to find or not being sold let me know I can make a lot of the part on a superhawk
03-25-2013, 05:30 PM
#2
Well take off, eh.
SuperBike
Join Date: Jun 2012
Location: QC, Canada
Posts: 1,204
One thing that is not made as an after market part for the hawks, are
chain adjusters. You may want to look into this, or, at least take a stab
at it if you wish. I'm sure you will find a few hawkers interested in this.
You just have to keep in mind the importance and solidity of this part, it can't be something flimsy.
Good luck
chain adjusters. You may want to look into this, or, at least take a stab
at it if you wish. I'm sure you will find a few hawkers interested in this.
You just have to keep in mind the importance and solidity of this part, it can't be something flimsy.
Good luck
03-25-2013, 08:31 PM
#5
Member
Squid
Thread Starter
Join Date: Feb 2011
Posts: 56
I can try those like almost like modified stock pieces to me I'm in the middle of making a set or rear set for my own bike now when I get done with them I will post them here on the forum and see what people think and would change
03-27-2013, 04:31 PM
#16
Member
Squid
Thread Starter
Join Date: Feb 2011
Posts: 56
I haven't got to the final cost yet still in the design part I'm thinking of making it so you can use the stock pegs or aftermarket I'm trying to make them cost effective and adjustable so I should know more in a week or so I need to make a set for my bike it self I just don't want to make junk and not reliable
03-28-2013, 04:22 PM
#19
Member
Squid
Thread Starter
Join Date: Feb 2011
Posts: 56
After posting that I did a little more thinking on it and design work and holes is the way to go now it what the material to make the going to cost that the biggest factor and my be the nail in the coffin on this project
03-28-2013, 10:09 PM
#21
Member
Squid
Join Date: Mar 2013
Posts: 33
One thing that is not made as an after market part for the hawks, are
chain adjusters. You may want to look into this, or, at least take a stab
at it if you wish. I'm sure you will find a few hawkers interested in this.
You just have to keep in mind the importance and solidity of this part, it can't be something flimsy.
Good luck
chain adjusters. You may want to look into this, or, at least take a stab
at it if you wish. I'm sure you will find a few hawkers interested in this.
You just have to keep in mind the importance and solidity of this part, it can't be something flimsy.
Good luck
03-29-2013, 04:21 PM
#22
Senior Member
Back Marker
Join Date: Jun 2009
Location: Beaverton, OR
Posts: 139
04-01-2013, 11:37 AM
#23
Member
Squid
Join Date: Apr 2011
Location: Canada
Posts: 85
04-03-2013, 11:29 AM
#24
Member
Squid
Join Date: Mar 2013
Posts: 33
Hear are the rearsets I'm planning to put on my bike once I complete Rc51 fairings and tail. Will need the pivot brackets that the rearsets mount to.
https://www.superhawkforum.com/forum...-fairing-7257/
https://www.superhawkforum.com/forum...ead.php?t=7505
https://www.superhawkforum.com/forum...-fairing-7257/
https://www.superhawkforum.com/forum...ead.php?t=7505
04-11-2013, 05:55 PM
#25
Member
Squid
Thread Starter
Join Date: Feb 2011
Posts: 56
Been really busy at my day job so I haven't had a ton of time to work on the rear sets but I did however get some time to run some bar end so if anyone need a set or wants to get a new set o alum bar end pm me i will also post another thread on he with the for sale 15.00 bucks a set plus shipping
04-12-2013, 12:59 AM
#27
Habitual fettler
Squid
Join Date: Sep 2009
Posts: 8
I'd certainly be interested in buying a set.
I've been following this on VTR1000 with interest:
www.vtr1000.org • View topic - Rearsets
I've been following this on VTR1000 with interest:
www.vtr1000.org • View topic - Rearsets
07-03-2013, 11:16 PM
#29
Senior Member
SuperBike
Join Date: Mar 2012
Location: New South Wales Australia
Posts: 1,544
Is This till On The Cards
I am in Australia and would be very interested in a set if you get around to it.
The choices are limited and even though I could get a set modified to fit I prefer something that just bolts on and is adjustable.
The choices are limited and even though I could get a set modified to fit I prefer something that just bolts on and is adjustable.
