1998 Superhawk part out
10-27-2013 | 11:08 AM
#42
Senior Member
Superstock
Joined: Jul 2013
Posts: 458
From: Rome, GA
Hes a little slow to respond to PM's at times as he's not always on the forums but I've ordered parts from him twice and shipping has always been quick and stuff is as he describes it if not a little better
03-26-2016 | 06:22 PM
#47
Junior Member
Squid
Joined: Mar 2016
Posts: 11
hello I am looking for the interconnecting vacuum hose between the carbs and one of the tips, if anybody has any parts or the proper technical name or numbers a big thank you 
https://www.dropbox.com/s/d1c86cnuzt...0hose.JPG?dl=0
https://www.dropbox.com/s/d1c86cnuzt...0hose.JPG?dl=0
03-28-2016 | 09:34 PM
#48
That one guy
Back Marker
Joined: Jun 2015
Posts: 228
From: Broken Arrow
It's proper name is "it's not a vaccum line." I can't remember the ID of the hose but just measure the OD of the connection point then go to the local auto part store and ask for hose that has the same ID.
From the carbs those hoses connect to literally nothing and are not even really required.
From the carbs those hoses connect to literally nothing and are not even really required.
Last edited by Meier Link; 03-28-2016 at 09:37 PM.
04-23-2016 | 05:26 AM
#53
Thread Starter
Member
Squid
Joined: Jul 2009
Posts: 44
Sorry for the delayed response. I cannot see the pic for the engine case, but, I still have a complete engine and I am willing to part it out. Please resend pic to confirm part. Gauge cluster is still available. Clutch cover is still available. Please make fair offers. Include where the items will be shipping to so that I can get shipping estimates. Thanks.
05-22-2016 | 05:12 PM
#59
Rex Kramer-Thrill Seeker
SuperBike
Joined: Jan 2011
Posts: 2,312
From: Brookfield, WI
Welcome!
Do you need the actuall needle, or the black plastic threaded part? The black plastic part is what usually cracks.
If mmtro1 doesn't have the parts you need, I may have them on an extra set of carbs.
Do you need the actuall needle, or the black plastic threaded part? The black plastic part is what usually cracks.
If mmtro1 doesn't have the parts you need, I may have them on an extra set of carbs.
05-22-2016 | 06:27 PM
#60
Junior Member
Squid
Joined: May 2016
Posts: 4
Hi Crux,
Already upgraded to the brass fittings but upon disassembly one of the needles proved tweaked at the tip. Tried to straighten but tip snapped off. I'd gladly purchase from whomever.
What info do you need to get the transaction started? Oh..and thank you for chiming in!
Already upgraded to the brass fittings but upon disassembly one of the needles proved tweaked at the tip. Tried to straighten but tip snapped off. I'd gladly purchase from whomever.
What info do you need to get the transaction started? Oh..and thank you for chiming in!
